Diseminare/publicatii.

Demonstrarea valorificarii rezultatelor obtinute in cadrul etapelor proiectului prin publicare de articole stiintifice si participare la sesiuni/conferinte stiintifice

Key Engineering Materials 2017, vol.750 "

Popescu Gabriela, Branzei Mihai, Popescu Cristian, Matei Alecs Andrei, Trusca Roxana, Csaki Ioana, Pressure Influence on the AlCrFeNiMn/Graphite High Entropy Composite Microhardness,Key Engineering Materials 2017, vol.750, ISSN: 1662-9795, p.9-11, proceeding BDI, indexat SCOPUS, DOI: 10.4028/www.scientific.net/KEM.7,2017.

Articol:...

Materials Performance and Characterisation – ASTM "

Dumitru Mitrica, Vasile Soare, Ionut Constantin, Mihai Teodor Olaru, Victoria Soare, Viorel Badilita, Florentin Stoiciu, Gabriela Popescu, Ioan Carcea,Influence of the heat treatment processes on the properties of high entropy alloys based on Al-Cr-Fe-Mn-Ni system,Materials Performance and Characterisation – ASTM, ISSN: 2379-1365 https://doi.org/10.1520/MPC20170018, 2017

Articol:...

Key Engineering Materials 2017, vol.750 "

Buluc Gheorghe, Chelariu Romeo, Popescu Gabriela, Sarghi Mihail, Carcea Ioan, Study on Wear Resistance FeNiCrMnAl High Entropy Alloy - Mechanical Properties,Key Engineering Materials 2017, vol.750, ISSN: 1662-9795, p.34-38, proceeding BDI, indexat SCOPUS, DOI: 10.4028/www.scientific.net/KEM.7,2017.

Articol:...

10th International Conference of Materials Science and Engineering – BRAMAT "

Dumitru Mitrica, Vasile Soare, Mihai Tudor Olaru, Valentin Dragut, Gabriela Popescu, Cristian Predescu, Andrei Berbecaru, Victoria Soare, Mihai Ghita,Influence of the element additions to the microstructural and mechanical characteristics of selected high entropy alloys,10th International Conference of Materials Science and Engineering – BRAMAT, 8-11 martie Brasov, 2017, prezentare orala, 2017.

Articol:...

10th International Conference of Materials Science and Engineering – BRAMAT "

I. Carcea, R. Chelariu, B.Istrate, A.Ciorobatca, G.Buluc,Oxidation of FeNiCrMnAl High Entropy Alloy - Wear Resistant Alloy. Chemical and Structural Characterization,10th International Conference of Materials Science and Engineering – BRAMAT, 8-11 martie Brasov, 2017, poster, 2017.

Articol:...

10th International Conference of Materials Science and Engineering – BRAMAT "

Florea M.R., Buluc G., Asavei L., Carcea I.,Oxidation behavior of induction melted FeNiCrMnCu multi-component high-entropy alloys,10th International Conference of Materials Science and Engineering – BRAMAT, 8-11 martie Brasov, 2017, poster, 2017.

Articol:...

10th International Conference of Materials Science and Engineering – BRAMAT "

Popescu Gabriela, Csaki Ioana, Popescu C.A., Branzei M., Trusca Roxana, Mitrica D., Soare V.,Microstructure and Properties of AlCrFeNiMn/Gr High Entropy Composite Processed by Mechanical Alloying and Spark Plasma Sintering,10th International Conference of Materials Science and Engineering – BRAMAT, 8-11 martie Brasov, 2017, prezentare orala, 2017.

Articol:...

10th International Conference of Materials Science and Engineering – BRAMAT "

R.L. Asavei, R. M. Florea, G. Buluc, R. Chelariu, I. Carcea,Microstructural Analysis and Mechanical Properties of Aluminum Composite Materials Reinforced with Particles Based on FeNiCrMnAl High Entropy Alloys,10th International Conference of Materials Science and Engineering – BRAMAT, 8-11 martie Brasov, 2017, poster, 2017.

Articol:...

International Conference Modern Technologies in Industrial Engineering ModTech "

Dumitru Mitrica, Vasile Soare, Mihai Teodor Olaru, Gabriela Popescu, Cristian Predescu, Ioan Carcea, Viorel Badilita, Victoria Soare, Florentin Stoiciu,High entropy alloys for steam power plant applications,International Conference Modern Technologies in Industrial Engineering ModTech, Sibiu, ISSN 2286-4369, poster, 2017.

Articol:...

International Conference Modern Technologies in Industrial Engineering ModTech "

I. Carcea, R. Chelariu, L. Asavei, Cimpoieru N., Florea M.R.,Investigations on composites reinforced with HEA particles,International Conference Modern Technologies in Industrial Engineering ModTech, Sibiu, ISSN 2286-4369, poster, 2017.

Articol:...

5th INTERNATIONAL CONFERENCE ON POWDER METALLURGY & ADVANCED MATERIALS – RoPM&AM "

Popescu Gabriela, Popescu C.A., Branzei M., Trusca Roxana, Mitrica D., Soare V,AlCrFeNiMn/TiB2 high entropy composite processed by mechanical alloying and spark plasma sintering,5th INTERNATIONAL CONFERENCE ON POWDER METALLURGY & ADVANCED MATERIALS – RoPM&AM 2017, 17-20 Sept. Cluj-Napoca, ROMANIA, prezentare orala. 2017.

Articol:...

European Congress and Exhibition on Advanced Materials and Processes – EUROMAT "

I. Carcea, R. M. Florea, L. Asavei, V. Soare, R. Chelariu,Microstructure and mechanical characterization of Al/HEAp composites,European Congress and Exhibition on Advanced Materials and Processes – EUROMAT 2017, 17-22 Septembrie 2017, Salonic, Grecia, poster,2017

Articol:...

European Congress and Exhibition on Advanced Materials and Processes – EUROMAT "

D. Mitrica, V. Soare, M. Olaru, V. Badilita, V. I. Soare, F. Stoiciu, I. Carcea,Heat treatment and deformability of Al-Cr-Fe-Mn-Ni-Zr based high entropy alloys,European Congress and Exhibition on Advanced Materials and Processes – EUROMAT 2017, 17-22 Septembrie 2017, Salonic, Grecia, poster,2017

Articol:...

EMRS fall meeting-Polonia "

Dumitru Mitrica, Albert Tudor, Antonio Rinaldi, Vasile Soare, Cristian Predescu , Andrei Berbecaru, Florentin Stoiciu, Viorel Badilita,Structural transformations of heat treated Co-less high entropy alloys,EMRS fall meeting, Var?ovia, Polonia, 2017

Articol:...

International Conference on Innovative Research 2016 - ICIR Euroinvent 2016 "

G.Buluc,I.Florea,R.Chelariu,G.Popescu,I.Carcea, Investigation of the mechanical properties of FeNiCrMnSi high entropy alloy wear resistant,International Conference on Innovative Research 2016 - ICIR Euroinvent 2016, 2016.

Articol:...

International Conference on Innovative Research 2016 - ICIR Euroinvent 2016 "

G.Popescu,M.A.Matara,I.Csaki,C.A.Popescu,R.Trusca, Synthesis and characterization of a new high entropy composite matrix,International Conference on Innovative Research 2016 - ICIR Euroinvent 2016, 2016.

Articol:...

ModTech International Conference - Modern Technologies in Industrial Engineering IV "

G.Popescu,M.M.Adrian,I.Csaki,C.A.Popescu,D.Mitrica,S.Vasile and I.Carcea, Mechanically Alloyed High Entropy Composite,ModTech International Conference, 2016.

Articol:...

WORLD PM2016- congress and exhibition "

Csaki, Ioana,Popescu, Gabriela,Mihaita Adrian Matara,Trusca, Roxana,Vasile Soare,Dumitru Mitrica, Structural Evolution of AlCrFeNiMn/Graphite During Mechanical Alloying from 5 to 40 Hours,WORLD PM2016- congress and exhibition 9-13 Octombrie ,Hamburg,Germania, 2016.

Articol:...

BRAMAT 2015 (5-7 martie 2015) "

G. POPESCU, V. SOARE, D. MITRICA, I. CSAKI, V. BADILITA, M. GHITA, I. CARCEA, Study of high entropy alloys synthesis by induction melting and mechanical alloying, 9th International Conference on Materials Science and Engineering – BRAMAT 2015, Brasov – ROMANIA, 5 – 7 March 2015. Book of Abstracts – BRAMAT 2015 - 9th International Conference on Materials Science and Engineering, p.73.

Articol:...


I. FLOREA, B. ISTRATE, V. SOARE, I. CARCEA, G.BULUC, Microstructures and mechanical properties of FeNiCrMnAl high entropy alloys, 9th International Conference on Materials Science and Engineering – BRAMAT 2015, Brasov – ROMANIA, 5 – 7 March 2015. Book of Abstracts – BRAMAT 2015 - 9th International Conference on Materials Science and Engineering

Articol:...

RICCCE 2015 (2-5septembrie 2015) "

Dumitru Mitrica, Vasile Soare, Ionut Constantin, Gabriela Popescu, Viorel Badilita, Florentin Stoiciu, Ana Maria-Julieta Popescu, Improvement of the mechanical and corrosion resistance characteristics of AlCrFeMnNi high entropy alloy by the annealing process, 19th Romanian International Conference on Chemistry and Chemical Engineering RICCCE, Sibiu, Romania, September 2-5, 2015.

Articol:...

EUROPM 2015 (4-7 octombrie 2015) "

Gabriela POPESCU; Ioana CSAKI; Cristian Aurelian POPESCU; Vasile SOARE; Dumitru MITRICA; Aurelian Buzaianu; Mihaita Adrian MATARA , Equiatomic nanocrystalline AlCrFeNiMn high entropy alloy evolution during mechanical alloying

Articol:...

Revista COMPOSITES PART B-ENGINEERING noiembrie 2015 "

Moldovan, P; Csaki, I; Popescu, G; Lucaci, M; Lungu, M; Butu, M, Microstructure evolution and tribological properties for new A1Si9Cu3/5%Gr(Cu) composite, COMPOSITES PART B-ENGINEERING, Vol. 81, pages 141-148, Publ. Nov 2015, Document Type: Article, Accession Number: CCC:000361406300015, ISSN: 1359-8368, ISI Document Delivery No: CR5TF. Impact Factor: 2,983

Articol:...

Revista Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science, aprilie 2015 "

Soare V., Mitrica D., Constantin I., Popescu G., Csaki I., Târcolea M., Carcea I., The Mechanical and Corrosion Behaviors of As-cast and Re-melted AlCrCuFeMnNi Multi-Component High-Entropy Alloy, Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science, Vol. 46, Iss. 4, pp.1468-1473, DOI: 10.1007/s11661-014-2523-7, Published Apr.2015. Docum. Type: article. Accession no.: WOS:000350300900008, ISSN: 1073-5623, elSSN: 1543-1940. Factor de impact 2013/2014: 1,73.

Articol:...

Advance Research Materials, 2015 "

I. Florea, Gh. Buluc, R. Chelariu, E. R. Baciu, I. Carcea, Microstructure and corrosion properties investigations of AlCrNiCuMn high-entropy alloy, Advance Materials Research, Vol. 1128, 2015.

Articol:...

Advance Research Materials, 2014 "

Gh. Buluc, I. Florea, O. Baltatescu, C. Roman , I. Carcea, Microstructure and mechanical properties of FeNiCrCuAl high entropy alloys, Advanced Materials Research Vol. 1036 (2014) pp 101-105 Online: 2014-10-01 © (2014) Trans Tech Publications, Switzerland doi:10.4028/www.scientific.net/AMR.1036.101

Articol:...

Conferinta MODTECH 17-20 iunie 2015 "

Florea I.,Buluc Gh. , Florea R. M. , Soare V. , Carcea I., Study on Corrosion Resistanceof High- Entropy Alloy in Medium Acid Liquid and Chemical Properties,Conferinta MODTECH, 2015, publicata in IOP Publishing, 2015

Articol:...

Gh. Buluc, I. Florea , O. Baltatescu , R. M. Florea, I. Carcea, Investigation of FeNiCrWMn – a new high entropy alloy,Conferinta MODTECH, 2015, in curs de publicare in in IOP Publishing, 2015

Articol:...

TEHNOMUS, 2015 "

Gh. Buluc, I. Florea, A. Alexandru ,I. Carcea, The influence of aluminum in high entropy alloy FeNiCrCuAl,,Publicata in TEHNOMUS, 2015– New Technologies and Products in Machine Manufacturing Technologies

Articol:...

Jurnalul Analele Universitatii Dunarea de Jos ,2015 "

Gh. Buluc, I. Florea, R. Chelariu, I. Carcea, FeNiCrMnAl- A new high entropy alloy. Mechanical properties,Jurnalul Analele Universitatii “Dunarea de Jos” din Galati. Fascicula IX (cotat BDI), 2015.

Articol:...